16 / 32 EN
Hand Blender / User Manual
4. Put the chopper lid “10” onto the
chopping bowl “12”.
5. Put the base unit “5” onto the
chopper lid “10”. Turn the base
unit to the left so that it is firmly
locked into place. Make sure the
base unit is securely attached to
the chopper unit.
C
During operation al-
ways hold the chop-
ping bowl with one
hand to prevent fall-
ing over.
6. Insert the plug “2” into the wall
socket.
7. Press and hold down the On/Off
button level II “4”.
– The appliance starts operating.
C
Do not use the chop-
per for longer than 1
minute at a time.
C
You will achieve the
best results if you
press the On/Off
button, level II “4” in-
termittently.
8. Release the On/Off button level
II “4” when you finish the pro-
cess and disconnect the power
plug from the wall socket.
9. Disassemble the base unit “5”
from the chopper lid “10” by tur-
ning the base unit to the right
and pulling it off.
10. Take the chopper lid “10” off.
Take the chopping blade “11”
out of the chopping bowl “12”
carefully prior to emptying the
chopped food.
C
If the chopper does
not work or if the
chopping blade “11”
only turns slowly,
first pull out the
power plug “2”. Then
take the base unit
“5” and the chopper
lid “10” off. Check
the chopping bowl
“12” to see if there is
something blocking
the chopping blade.
Maybe you put too
much hard food in
the chopping bowl.
3
Operating the product
