EN
27
4
Before operating
Starting
Final Check
Before you start using the refrigerator
check that:
1.The front feet have been adjusted
so the appliance is level.
2.The interior is dry and air can
circulate freely around the outside of
the product.
3.Clean the interior as recommended
under “CLEANING AND CARE.”
4.Insert the plug into the wall socket
and switch on the electricity supply.
When the door is open the interior light
will come on.
5.You will hear a noise as the
compressor starts up. The liquid and
gases sealed within the refrigeration
system may also give rise to noise,
whether the compressor is running or
not which is quite normal.
6. We recommend that you set the
thermostat thermostat to 3 (three) and
monitor the temperature to ensure
the appliance maintains desired
storage temperatures (See section
Temperature Control and Adjustment).
7.
Do not load the appliance
immediately it is switched on. Wait until
the correct storage temperature has
been reached.
We recommend that you check
the temperature with an accurate
thermometer
Summary of Contents for BL 77
