background image

EN

22

6

  Maintenance and cleaning

•  We recommend that you switch off 

the appliance at the socket outlet 

and pull out the mains plug before 

cleaning.

•  Never use any sharp abrasive 

instrument, soap, household 

cleaner, detergent and wax polish 

for cleaning.

•  Use luke warm water to clean the 

cabinet of the appliance and wipe it 

dry.

•  Use a damp cloth wrung out in 

a solution of one teaspoon of 

bicarbonate of soda to one pint of 

water to clean the interior and wipe 

it dry.

•  Make sure that no water enters the 

lamp housing.

•  If the appliance is not going to be 

used for a long period of time switch 

it off, remove all food, clean it and 

leave the door ajar.

•  Any dust that gathers on the 

condenser, which is located at the 

back of the appliance, should be 

removed once a year with a vacuum 

cleaner.

•  Check door seals regularly to ensure 

they are clean and free from food 

particles.

•  Removal of door rack
•  To remove door racks, remove all the 

contents and then simply push the 

door rack upwards from the base.

•  To remove a freezer drawer, pull 

it as far as possible, and then tilt 

it upwards, and then pull it out 

completely.

•  To remove the freezer flap door, first 

open the door 3” and then gently 

pull it off. Make sure that the flap is 

in place before closing the freezer 

door.

•  Make sure that the special plastic 

container (drain tray) at the back of 

the appliance which collects defrost 

water is clean at all times. If you 

want to remove the tray to clean it 

follow the instructions below :

•  Switch off at the socket outlet and 

pull out the mains plug.

•  Clean the drain tray and wipe it dry.
•  Push the lug down with the tip of 

a screw driver & pull out with a jerk 

movement

•  Reassemble reversing the sequence 

and operations.

•  Avoid spillage of food particularly 

small items like rice, peas, beans 

through the fan guard as they 

may cause the cooling system to 

block and therefore operate less 

efficiently.

A

Never use cleaning agents or water 

that contain chlorine to clean the 

outer surfaces and chromium coated 

parts of the product. Chlorine causes 

corrosion on such metal surfaces.

Summary of Contents for BL20

































Reviews: