Beko CCFM1582W, User Manual

EN

11

Adjusting the legs

If your refrigerator is unbalanced;

You  can  balance  your  refrigerator 

by turning its front legs as illustrated 

in  the  figure.  The  corner  where  the 

leg  exists  is  lowered  when  you  turn 

in  the  direction  of  black  arrow  and 

raised when you turn in the opposite 

direction.  Taking  help  from  someone 

to  slightly  lift  the  refrigerator  will 

facilitate this process.

Changing the illumination 

lamp 

To  change  the  Bulb/LED  used  for 

illumination  of  your  refrigerator,  call 

your AuthorisedService.

The  lamp(s)  used  in  this  appliance 

is  not  suitable  for  household  room 

illumination.  The  intended  purpose 

of  this  lamp  is    to  assist  the  user  to 

place  foodstuffs  in  the  refrigerator/

freezer  in  a  safe  and  comfortable 

way.The lamps used in this appliance 

have  to  withstand  extreme  physical 

conditions  such  as  temperatures 

below -20 °C.

(only chest and upright freezer)

Placing and Installation

If  the  entrance  door  of  the  room 

where the refrigerator will be installed 

is not wide enough for the refrigerator 

to pass through, then carefully remove 

the doors of your refrigerator and pass 

it sideways through the door. 

1. 

Install your refrigerator to a 

place that allows ease of use.

2. 

Keep your refrigerator away 

from heat sources, humid places and 

direct sunlight.

3. 

There must be appropriate air 

ventilation around your refrigerator 

in order to achieve an efficient 

operation. If the refrigerator is to be 

placed in a recess in the wall, there 

must be at least 5 cm distance with 

the ceiling and at least 5 cm with the 

wall. Do not place your product on the 

materials such as rug or carpet.

4. 

Place your refrigerator on an 

even floor surface to prevent jolts.

   Important: 

Care must be taken 

while cleaning / carrying the 

appliance to avoid touching the 

bottom of the condenser metal wires 

at the back of the appliance as you 

might injure your fingers and hands. 

Important:

This appliance is not 

designed for stacking with any other 

appliance. When positioning your 

appliance, take care not to damage 

your flooring, pipes,wall coverings etc.

Important:

  Make  sure  that  mains 

cable is not caught under the appliance 

during and after carrying / moving the 

appliance,  to  avoid  the  mains  cable 

becoming cut or damaged

Beko  declines  to  accept  any  liability 

should  the  instructions  not  be 

followed.