background image

TRANSPORTATION INSTRUCTIONS 

 

1.  The appliance should be transported only in a vertical upright position. 
 

The  packing as supplied must be intact during transportation. 

2.  If during the course of transport the product has been transported horizontally, it 

must only be laid on its left hand side (when facing the lid front) and it must not 
be operated for at least 4 hours to allow the system to settle after the appliance 
is brought back to upright position. 

3.  For  the  protection  of  the  appliance  during  warehousing  and  transport,  it  is 

provided  with  spacers  between  the  lid  and  the  cabinet  (in  the  front  and  rear 
side).  These  spacers  will  be  removed  before  putting  the  appliance  into 
operation. 

4.  Failure to comply with the above instructions could result in damage occuring to 

the appliance. The manufacturer will not be held responsible if these instructions 
are disregarded. 

5.  The  appliance  must  be  protected  against  rain,  moisture  and  other  atmospheric 

influences. 

 

IMPORTANT : Care must be taken while cleaning / carrying the appliance to avoid 
touching  the  condenser  metal  wires  at  the  back  of  the  appliance,  as  you  might 
injure your fingers and hands or damage your product. 

 

IMPORTANT : This appliance is not designed for stacking with any other appliance. 
Do not attempt to sit or stand on top of your appliance as it is not designed for such 
use. You could injure yourself or damage the appliance. 

 

IMPORTANT  :  Make  sure  that  mains  cable  is  not  caught  under  the  appliance 
during  and  after  carrying  /  moving  the  appliance,  to  avoid  the  mains  cable 
becoming cut or damaged. 

 

IMPORTANT  :  If  the  supply  cord  is  damaged,  it  must  be  replaced  by  the 
manufacturer,  its  service  agent  or  similarly  qualified  persons  in  order  to  avoid  a 
hazard. 

 

IMPORTANT  :  Excess  deposit  of  ice  on  the  frame  and  the  baskets  should  be 
removed regularly with the plastic scraper provided. Do not use any metal parts to 
remove the ice. 
The presence of this ice build-up makes impossible to close the lid correctly. 
 
When positioning your appliance take care not to damage your flooring, pipes, wall 
coverings  etc.  Do  not  move  the  appliance  by  pulling  by  the  lid  or  handle.  Do  not 
allow  children  to  play  with  the  appliance  or  tamper  with  the  controls.  BEKO  plc. 
declines to accept any liability should the instructions not be followed. 

 
 
 
 
 
 
 

Summary of Contents for CF1300APW















Reviews: