Residual risk
14
CLEARPOINT® L 205 – L295 V
5
Residual risk
The plant offers state-of-the-art technology. However, certain residual risks remain.
Risk through disregard of the safety instructions.
The safety instructions included in these operating instructions point to further residual risks. It is,
therefore, of vital importance to observe all safety instructions.
6
Field of application and proper use of the CLEARPOINT
®
V activated-carbon
adsorber
These operating instructions apply exclusively to the tank variants of the CLEARPOINT
®
L205 V to L295
V activated-carbon adsorbers from BEKO TECHNOLOGIES GMBH and refer to the device type without
dust filter and internal tubing.
The CLEARPOINT V
®
activated-carbon adsorber must only be applied under the conditions described in
this user manual, and only in connection with the components recommended or approved by the
manufacturer.
The field of application comprises the reduction of oil vapours and odorous substances from compressed
air or nitrogen. The system is intended for the use under industrial conditions inside buildings.
Any other use is considered improper. The manufacturer shall not be liable for problems occurring as a
consequence of improper use. The operator alone is responsible for any hazard resulting from that.
Please check, prior to reading the operating instructions, whether or not these instructions
correspond to the device.
Read these installation and operating instructions carefully prior to any intervention regarding
the CLEARPOINT
®
V.
The operating instructions must be accessible at all times at the place of application of the
device.
If you have any queries regarding these instructions, please contact BEKO TECHNOLOGIES
GMBH.
To ensure safe operation, the device must only be operated and maintained in accordance
with the indications in the operating instructions. In addition, the national and operational
statutory provisions and safety regulations, as well as the accident prevention regulations
required for the respective case of application, need to be observed during employment. This
applies accordingly when accessories are used.
Non-observance of the installation and operating instructions involves risks for persons and
systems.
Proper functioning and trouble-free operation of the activated-carbon adsorber is only ensured when the
transport, storage, set-up, installation, operation and maintenance are carried out in accordance with the
advice included in this user manual.
To handle the plant, the personnel must be trained to deal with devices of the compressed-air technology
and need to know the contents of this user manual as far as handling is concerned.
To start up and maintain the plant, the personnel must be familiar with the safety concepts of the
compressed-air technology. The personnel must be authorised and trained in such a manner that they
are capable of starting up and maintaining such facilities.
The proper employment and use of the CLEARPOINT
®
V according to the directions requires the exact
compliance with the installation instructions, in particular in respect of:
