CLEARPOINT® Flanged L100-L304_us_en_2014-6 (rev. A)
4
Don’t use
water to extinguish fire on the filter or in the surrounding area.
INTRODUCTION
These instructions for installation and operation will help you to become more familiar with the CLEARPOINT®
filter and enable you to utilize the unit within the intended scope of application. Furthermore, the instructions
contain important information for ensuring safe, correct and economic operation.
The individual directions have to be followed precisely as described in order to avoid hazards or damage.
Additionally, it will be necessary
to observe the accident prevention regulations valid in the operator’s country
and at the place of installation together with the approved rules of engineering practice concerning correct
safety and work procedures.
All persons carrying out the installation, commissioning, maintenance or repair of the product on the operator’s
premises must have read and understood these instructions for installation and operation. The instructions
should be permanently available at the place of installation.
CLEARPOINT® filters are built according to the state of the art and the approved safety rules of engineering practice.
However, the use of the product can endanger the health and life of attending personnel or third parties and can have a
considerable negative effect on the product itself or on the other material assets if:
The personnel are not properly trained.
The product is used for purposes other than the intended application.
The unit is not correctly serviced or maintained.
This could render the guarantee invalid
CLEARPOINT® filters are designed for gaseous neutral media without any aggressive substances. Non-observance of this
condition excludes all liability claims.
BEKO TECHNOLOGIES reserves the right to implement changes at any time, while retaining the essential features of the
CLEARPOINT® filter, if such changes become necessary to enhance the technical capacity of the unit for reasons of safety
or standard commercial practice.
