Beko CM 9101 BB, User Manual

EN / 28

You can switch on and off the ma-
chine with On / Off button when the
Child Lock is active. When you
switch on the machine again, pro-
gramme will resume from where it
has stopped.
When the Child Lock is enabled, an
audio warning will be given if the
buttons are pressed. Audio warning
will be cancelled if the buttons are
pressed five times consecutively.

To activate the child lock:

Press and hold the related auxiliary func-
tion button for 3 seconds. After the count-
down as “3-2-1" on the display is over,
Child Lock symbol appears on the display.
When this warning is displayed, you can re-
lease the Auxiliary Function button 3.

To deactivate the child lock:

Press and hold the related auxiliary func-
tion button for 3 seconds. After the count-
down as “3-2-1" on the display is over,
Child Lock symbol disappears.

6.9 End Time

Time display

When the end time function is selected, the
remaining time until the programme starts
is shown in hours such as 1h, 2h, and the
remaining time to complete the programme
after your programme starts is shown in
hours and minutes as in the 01:30 ex-
ample.

Programme duration may differ
from the values in section "Pro-
gramme and consumption table"
depending on the water pressure,
water hardness and temperature,
ambient temperature, amount and
the type of laundry, auxiliary func-
tions selected and the changes at
the mains voltage.
After a certain period of time after
the end time function is activated,
the machine goes into standby
mode and some LEDs on the
screen turn off. If there is any user
input, the LEDs will turn on again.

With the End Time function, the end time of
the programme may be set up to 24 hours.
After pressing End Time button, the pro-
gramme's estimated ending time is dis-
played. If the End Time is set, End Time in-
dicator is illuminated.

In order for the End Time function is activ-
ated and the programme is completed at
the end of the specified time, you must
press Start/Pause button after adjusting the
time.

If you want to cancel End Time function,
press On/Off button to turn off and on the
machine.

When you have activated the End
Time function, do not add liquid de-
tergent in the powder detergent
compartment no 2. There is the risk
of staining of the clothes

a. Open the loading door, place the laun-

dry and put detergent, etc.

b. Select the washing programme, temper-

ature, spin speed and, if required, the
auxiliary functions.

c. Set the End Time of your choice by

pressing the End Time button. End Time
indicator lights.

d. Press Start / Pause. Time countdown

starts.