Beko CM 9101 BB, User Manual

EN / 36

softener step. Wash and clean the
drawer with hot water. Put the detergent
in the correct compartment.

• Detergent was mixed with the softener.

>>> Do not mix the softener with deter-
gent. Wash and clean the drawer with hot
water.

Detergent residue in the detergent
drawer. (**)

• Detergent was put in wet drawer. >>>

Dry the detergent drawer before putting
in detergent.

• Detergent has gotten damp. >>> Keep

detergents closed in an environment free
of humidity and do not expose them to
excessive temperatures.

• Water pressure is low. >>> Check the

water pressure.

• The detergent in the main wash compart-

ment got wet while taking in the prewash
water. Holes of the detergent compart-
ment are blocked. >>> Check the holes
and clean if they are clogged.

• There is a problem with the detergent

drawer valves. >>> Call the Authorised
Service Agent.

• Detergent was mixed with the softener.

>>> Do not mix the softener with deter-
gent. Wash and clean the drawer with hot
water.

• Regular drum cleaning is not applied.

>>> Clean the drum regularly. For this
procedure, see 

Cleaning the Loading

Door and the Drum [

}

 31]

Too much foam forms inside the
product. (**)

• Improper detergents for the washing ma-

chine is used. >>> Use detergents appro-
priate for the washing machine.

• Excessive amount of detergent is used.

>>> Use only sufficient amount of deter-
gent.

• Detergent was stored under improper

conditions. >>> Store detergent in a
closed and dry location. Do not store in
excessively hot places.

• Some meshed laundry such as tulle may

foam too much because of their texture.
>>> Use smaller amounts of detergent
for this type of item.

• Detergent was put in the wrong compart-

ment. >>>  Make sure you place the de-
tergent in the appropriate compartment.

• Softener is being taken early by the

product. >>> There may be problem in
the valves or in the detergent drawer.
Call the Authorised Service Agent.

Foam is overflowing from the detergent
drawer.

• Too much detergent is used. >>> Mix 1

tablespoonful softener and ½ l water and
pour into the main wash compartment of
the detergent drawer. >>> Put detergent
into the product suitable for the pro-
grammes and maximum loads indicated
in the “Programme and consumption
table”. When you use additional chemic-
als (stain removers, bleaches and etc.),
reduce the amount of detergent.

Laundry remains wet at the end of the
programme. (*)

• Excessive foam has occurred and auto-

matic foam absorption system has been
activated due to too much detergent us-
age. >>> Use recommended amount of
detergent.

(*) The product does not switch to spinning
step when the laundry is not evenly distrib-
uted in the drum to prevent any damage to
the product and to its surrounding environ-
ment. Laundry should be rearranged and
re-spun.
(**) Regular drum cleaning is not applied.
Clean the drum regularly. See 

Cleaning the

Loading Door and the Drum [

}

 31]

If you cannot eliminate the problem
although you follow the instructions
in this section, consult your dealer
or the Authorised Service Agent.
Never try to repair a nonfunctional
product yourself.