EN
16
6
Maintenance and cleaning
** We recommend that you switch off
the appliance at the socket outlet and
pull out the mains plug before cleaning.
** Never use any sharp abrasive
instrument, soap, household cleaner,
detergent and wax polish for cleaning.
** Use luke warm water to clean the
cabinet of the appliance and wipe it dry.
** Use a damp cloth wrung out in a
solution of one teaspoon of bicarbonate
of soda to one pint of water to clean the
interior and wipe it dry.
** Make sure that no water enters the
lamp housing.
** If the appliance is not going to be
used for a long period of time switch it
off, remove all food, clean it and leave
the door ajar.
** Any dust that gathers on the
condenser, which is located at the back
of the appliance, should be removed
once a year with a vacuum cleaner.
** Check door seals regularly to
ensure they are clean and free from
food particles.
** Removal of door tray
• To remove door racks, remove
all the contents and then simply push
the door rack upwards from the base.
** To remove a freezer drawer, pull it as
far as possible, and then tilt it upwards,
and then pull it out completely.
** To remove the freezer flap door, first
open the door 3” and then gently pull it
off. Make sure that the flap is in place
before closing the freezer door.
** Make sure that the special plastic
container (drain tray) at the back of
the appliance which collects defrost
water is clean at all times. If you want
to remove the tray to clean it follow the
instructions below :
• Switch off at the socket outlet and
pull out the mains plug.
• Push the lug down with the tip
of a screw driver & pull out with a jerk
movement
• Clean the drain tray and wipe it
dry.
• Reassemble reversing the
sequence and operations.
** Avoid spillage of food particularly
small items like rice, peas, beans
through the fan guard as they may
cause the cooling system to block and
therefore operate less efficiently.
