EN
24
• Capacity of the water tank is 2.2 liters
(3.8 pints); do not overfill.
• Push the lever of the water dispenser
with a rigid glass. If you are using
disposable plastic glasses, push the
lever with your fingers from behind
the glass.
1
1
2
Cleaning the water tank
Release the tank cover from the
water tank by opening latches at
both sides. Remove the water tank
and clean with warm and clean water.
Place the water tank to its seating,
install the tank cover and close the
latches.
3
Make sure that the parts removed
(if any) during cleaning are properly
attached to their original places.
Otherwise, water leakage may occur.
Important:
Components of the water tank and
water dispenser should not be washed
in dishwasher.
Water tray
Water that drips while using the
water dispenser accumulates in the
spillage tray. Take out the spillage
tray by pulling it towards yourself and
empty it regularly.
Take out the plastic strainer by
pressing it on sides.
Take the water valve out of the
water tank. When replacing it, make
sure that the seal is in place.