Beko DBKE386XI+, Instructions For Use Manual

What, if.... 

1- The appliance will not work, even 
though it is switched on. 

• Check if the power cable is properly connected!
• Check if the mains supply is in order, or if a 
circuit breaker has been tripped! 
• Check the temperature control for correct 
setting! 

2- There is a power failure. 

Your freezer is suitable for the long-term 
storage of frozen food that are available 
commercially and also can be used to freeze 
and store fresh food. 
Do not open the door in case of a power failure.
For a                rated appliance, frozen food in 
the freezer compartment will not be affected if 
the power failure lasts shorter than the 
“Conservation Time From Failure (hours)” 
mentioned in the rating label. 
If the power failure is longer than the 
“Conservation Time From Failure (hours)”, then 
the food should be checked and either consumed 
immediately or cooked and then re-frozen. 

3- The interior light does not work. 

Check the power supply! 

Check the installation of the light bulb! Unplug 
the power cable before checking the light bulb.
(Also see the section “Replacing the interior light”)

4- There is high temperature alarm 

If the actual temperature of the freezer 
compartment is warm then the alarm icon on 
the display lights on. The alarm icon lights off 
when the actual temperature of the freezer 
compartment cools down. 

The high temperature alarm may rise up due 
following situations. 
a) Warm food storage 
b) Warm air in the freezer compartment 
c) Freezer door is left open for a long time 

If the high temperature alarm remains on for 
more than 24 hours then contact with the 
customer service. 

The high temperature alarm is not active in 
24 hours after plugging the appliance into the 
electricity. 

GB 

Instruction for use 

5- There is error messages and alarm 

Incase any failure condition due wiring 
connection of the appliance occurs, and then 
the alarm icon on the display starts blinking . 

In case the alarm icon is on please contact 
with the customer service. The fuzzy control 
algorithm in order to preserve food takes 
place till the customer service arrives. 

The alarm icon lights off just after the removal 
of the failure. 

6- There is actual fridge temperature failure

There may be some oscillations on the actual 
fridge temperature shown on the display due; 
a) The fridge door is Opened / Closed 
frequently 
b) Loading warm packages inside the fridge. 
c) Leaving the fridge door open for a long 
period of time 

7- There is actual freezer temperature 
failure 

The appliance performs cooling considering 
the freezer set temperature. 

There may be some oscillations on the actual 
fridge temperature shown on the display due; 
a) The freezer door is Opened / Closed 
frequently 
b) Loading warm packages inside the freezer 
c) Leaving the freezer door open for a long 
period of time 

8- Other possible malfunctions 

Not every malfunction is a case for our 
customer service. Very often, you can easily 
resolve the problem without requesting 
service. 

21