Dryer / User Manual
29 / EN
8
Troubleshooting
Drying process lasts for a long time.
• Pores of the fibre filter might be clogged. >>>
Wash the filter with warm water.
• Condenser might be clogged. >>>
Wash the condenser.
• Ventilation grills at the front of machine might be blocked. >>>
Remove any items in
front of the ventilation grills that block ventilation.
• Ventilation might be inadequate if the installation area is very small. >>>
Open the
windows and doors in order to prevent excessive increase in room temperature.
• There might be furring on the damp sensor. >>>
Clean the damp sensor.
• Laundry might be overloaded. >>>
Do not overload the tumble drier.
• Laundry might not have been adequately spun. >>>
Increase the rpm of tumble drier.
Laundry is still wet at the end of drying.
C
Hot laundry unloaded at the end of drying feel wetter than they really are.
• You may not have used a programme suitable for laundry type.>>>
Check the
maintenance labels on the laundry and select a programme suitable for their type, or
use the time programmes additionally.
• Pores of the fibre filter might be clogged. >>>
Wash the filter with warm water.
• Condenser might be clogged. >>>
Wash the condenser.
• Laundry might be overloaded. >>>
Do not overload the tumble drier.
• Laundry might not have been adequately spun. >>>
Increase the rpm of tumble drier.
Tumble drier does not turn on or programme cannot be started. Tumble drier does not acti-
vate when set.
• The power cord might not be plugged in. >>> Make sure the power cord is plugged in.
• Loading door might be open. >>> Make sure that the loading door is properly closed.
• You may not have set the programme or pressed the Start/Pause button. >>> Make
sure that you have set the programme and it is not in Pause position.
• Child lock might be active. >>> Disable the
child lock.
Programme was interrupted for no reason.
• Loading door might not be properly closed. >>>
Make sure that the loading door is
properly closed.
• A power cut might have occurred. >>>
Press the Start/ Pause button to start the
programme.
• Water tank might be full. >>>
Drain the water tank.
Laundry is shrunk, damaged or worn out.
• You may not have used a programme suitable for laundry type. >>>
Check the
maintenance labels on the laundry and select a programme suitable for their type.
The lighting inside the tumble drier does not turn on. (In models with lamps)
• You may not have turned on the tumble drier be using On/Off/Cancel button. >>>
Make
sure that the tumble drier is at ‘on’ position.
• Lamp might be broken. >>>
Contact the Authorised Service for the replacement of
lamp.