background image

14

Dishwasher / User’s Manual

/44 EN

Installation

Unpack the test 

strip.

Open the tap and 

let the water flow for 

approx. 1 minute.

Dip in the test strip 

into the water for 1 

second.

Take out the strip 

from the water and 

shake it.

Wait for 1 minute.

Make the necessary 

adjustment 

according to the test 

strip.

After detecting the water hardness:

1. After turning on the machine, press Delayed Start and P+ keys simultaneously. After the 

countdown (3, 2, 1) is displayed keep the keys pressed for a while.

2. Press P+ key to activate the   position.

3. Using Delayed Start key, adjust water hardness level according to the hardness of the 

supply water. See “Water hardness level adjustment table” for correct setting.

4. Press On / Off key to save the setting.

Water hardness level adjustment table

Hardness 

Level

English Water 

Hardness °dE

German Water 

Hardness °dH

French* Water 

Hardness °dF

Water Hardness Level Indicator

Level 0 

0-5

0-4

0-8

Press the Delayed Start key to switch the water hardness 

level to position 1. (r1)

Level 1

6-9

5-7

9-13

Level 2 

10-15

8-12

14-22

Press the Delayed Start key to switch the water hardness 

level to position 2. (r2)

Level 3

16-19

13-15

23-27

Press the Delayed Start key to switch the water hardness 

level to position 3. (r3)

Level 4

20-24

16-19

28-34

Press the Delayed Start key to switch the water hardness 

level to position 4. (r4)

Level 5

25-62

20-50

35-90

Press the Delayed Start key to switch the water hardness 

level to position 5. (r5)

Perform the same hardness level adjustment that you have set on the control panel also 

with the regeneration adjustment switch. For example, if you have adjusted to “3” in the 

control panel, also set the regeneration adjustment switch to 3. 

Regeneration Adjustment Switch

Level 0 

Level 1

Level 2 

Level 3

Level 4

Level 5

1

1

2

3

4

5

Summary of Contents for DFN26424W













































Reviews: