background image

Dishwasher / User’s Manual

9 / 41

EN

3

Installation

To make the product ready for use, 

make sure that the electricity, tap water 

supply and water drainage systems are 

appropriate before calling the Authorised 

Service Agent. If they are not, call a 

qualified technician and plumber to have 

any necessary arrangements carried out.

C

Preparation of the location 

and electrical, tap water and 

waste water installations at the 

place of installation is under 

customer's responsibility.

B

Manufacturer shall not be held 

responsible for damages arising 

from processes carried out by 

unauthorised persons.

A

Prior to installation, visually 

check if the product has any 

defects on it. If so, do not have 

it installed. Damaged products 

cause risks for your safety.

C

Make sure that the water inlet 

and discharge hoses are not 

folded, pinched or crushed 

while pushing the product into 

its place after installation or 

cleaning procedures.

When placing the product, pay attention 

not to damage the floor, walls, piping, etc. 

Do not hold the product from its door or 

panel to move it.

Appropriate installation 

location

 

Place the product on a solid and flat 

floor that has sufficient load carrying 

capacity! The product must be 

installed on a flat surface in order for 

the door to be closed comfortably and 

securely.

 

Do not install the product at places 

where temperature may fall below 

0ºC.

 

Place the product on a rigid floor. Do 

not place it on a long pile rug or similar 

surfaces.

B

Ensure the power cable does 

not get trapped under the 

product.

 

Make sure that you select a location 

that will allow you to load and unload 

the dishes in a fast and comfortable 

manner.

 

Install the product in a place close 

to the tap and the drain. Select the 

installation location by considering 

that it will not be changed after the 

connections are made.

Connecting water supply

 

Do not use old or used water inlet 

hose on the new product. Use the new 

water inlet hose supplied with the 

product.

 

Connect the water inlet hose directly 

to the cold water tap. Permitted water 

temperature up to 25°C. Pressure 

coming from the tap should be 

minimum 0.3 and maximum 10 bars. 

If the water pressure exceeds 10 

bars, a pressure relief valve should be 

installed in between.

 

Open the tap completely after making 

the connections to check for water 

leaks.

A

For your safety, close the water 

inlet tap completely after the 

washing programme is over.

Summary of Contents for DFN39530X












































Reviews: