background image

Dishwasher / User’s Manual

39 / 41

EN

Troubleshooting

A smear remains on glasses that resembles milk stain which can not be 

removed when wiped by hand. A bluish / rainbow appearance occurs when 

the glass is pointed to light.

•  Excessive rinse aid is used. >>>Lower rinse aid setting. Clean the spilled rinse aid 

when adding rinse aid.

•  Corrosion has occurred on glass due to soft water. >>> Measure the hardness of the 

supply water appropriately and check the water hardness setting. If your supply water 

is soft (<5 dH), do not use salt. Choose programmes that wash in higher temperatures 

(e.g. 60-65°C). You can also use glass protective detergents that are commercially 

available.

Foam forms in the machine.

•  Dishes are washed with hand-wash detergent by hand but not rinsed before placing 

them into the machine. >>> Hand-wash detergents do not contain antifoam. There is 

no need to hand-wash the dishes before placing them into the machine. Removing the 

coarse soil on the dishes under tap water, with a tissue paper or fork will be sufficient.

•  Rinse aid has spilled into the machine when adding rinse aid. >>> Take care that rinse 

aid is not spilled in the machine when you are filling it. Clean any spilled rinse ait with 

the help of a tissue paper/towel.

•  Lid of the rinse aid reservoir is left open. >>> Make sure that the lid of the rinse aid 

reservoir is closed after adding rinse aid.

Kitchen utensils are broken.

•  Dishes are not placed orderly in the machine. >>> Load the dishes as described in the 

user manual.

•  Baskets are overloaded.  >>> Do not overload the baskets in excess of their capacity.

Water remains in the dishwasher at the end of the programme.

•  Filters are clogged. >>> Check if the filter system is clean. Clean the filter system 

regularly as illustrated in section “Cleaning and Care”.

•  Discharge hose is clogged/blocked. >>> Check the discharge hose. If necessary, 

remove the discharge hose, clear the blockage and insert is as illustrated in the user 

manual. 

C

If you cannot eliminate the problem although you follow the instructions in 

this section, consult your dealer or the Authorised Service Agent. Never try to 

repair a nonfunctional product yourself.

Summary of Contents for DFN39530X












































Reviews: