background image

Dishwasher / User’s Manual

9 / 45 EN

3

Installation

Refer to the nearest Authorised Service 

Agent for installation of your product. To 

make the product ready for use, make sure 

that the electricity, tap water supply and 

water drainage systems are appropriate 

before calling the Authorised Service Agent. 

If they are not, call a qualified technician 

and plumber to have any necessary 

arrangements carried out.

C

Preparation of the location and 

electrical, tap water and waste 

water installations at the place 

of installation is the customer's 

responsibility.

B

Installation and electrical 

connections must be carried 

out by the Authorised Service 

Agent. Manufacturer shall not 

be held responsible for damages 

arising from processes carried 

out by unauthorised persons.

A

Prior to installation, visually 

check if the product has any 

defects on it. If so, do not have 

it installed. Damaged products 

cause risks for your safety.

C

Make sure that the water inlet 

and discharge hoses are not 

folded, pinched or crushed 

while pushing the product into 

its place after installation or 

cleaning procedures.

When placing the product, pay attention not 

to damage the floor, walls, piping, etc. Do 

not hold the product by its door or panel to 

move it.

Appropriate installation 

location

 

Place the product on a solid and flat 

floor that has sufficient load carrying 

capacity! The product must be installed 

on a flat surface in order for the door to 

be closed comfortably and securely.

 

Do not install the product at places 

where temperature may fall below 0ºC.

 

Place the product at least 1 cm away 

from the edges of other furniture.

 

Place the product on a rigid floor. Do 

not place it on a long pile rug or similar 

surfaces.

B

Do not place the product on the 

power cable.

 

Make sure that you select a location 

that will allow you to load and unload 

the dishes in a fast and comfortable 

manner.

 

Install the product in a place close to 

the tap and the drain hole. Select the 

installation location by considering 

that it will not be changed after the 

connections are made.

Connecting water supply

C

We recommend attaching a 

filter on the house/apartment 

supply water inlet to protect the 

machine from damages that 

may arise from impurities (sand, 

dirt, rust, etc.) coming from the 

urban water supply system or 

from your own water system as 

well as to prevent complaints 

such as yellowing or sludge 

accumulation at the end of 

washing.

Summary of Contents for DFN39533X
















































Reviews: