14
Dishwasher / User’s Manual
/40 EN
Preparation
2. Turn the salt reservoir lid counter-
clockwise to open it (A).
3. Add 1 litre of water to salt reservoir of
your machine only in initial use.
4. Fill the salt reservoir with salt by
using the salt funnel (D). To speed up
dissolution rate of salt in water, stir it
with a spoon.
C
You can put about 2 kg of
softening salt into the salt
reservoir.
5. Replace the lid and tighten it when the
reservoir is full.
C
You need to add salt right
before starting the machine.
Thus, the overflowing
salty water will be flushed
immediately, preventing the risk
of corrosion in machine. In cases
where you would not start
washing immediately, run your
machine empty in the shortest
program.
If the water hardness level adjustment is set
to level 1, the “No salt warning indicator” will
illuminate continuously although it is not
necessary to use salt. If you use salt under
this condition, salt will not be consumed and
the Salt indicator will not illuminate.
C
If you move your house, it is
necessary to readjust water
hardness level of your machine
by considering the information
given above according to the
hardness level of the supply
water in your new location.
Your machine will display the
most recently adjusted water
hardness level.
Adding salt
Water softening system needs to be
regenerated in order for the product
operates with the same performance
continuously. Dishwasher salt is used for
this purpose.
C
Use only special softening salts
produced particularly for the
dishwashers in your machine.
C
It is recommended to use
granule- or powder-formed
softening salts in the water
softening system. Do not use
salts that do not completely
dissolve in water such as table
salt or rock salt. Otherwise the
performance of the system
may deteriorate in time.
C
Salt reservoir will be filled
with water when you start
the product. For this reason,
add salt before operating the
machine.
1. Firstly, take the lower basket out to
add softening salt.
Summary of Contents for DFS04010
Page 42: ......
