Beko DH9443CX0W, User Manual

25

Dryer / User Manual

7

 Troubleshooting

Drying operation takes too long.
Fibre filter (interior and exterior filter) pores may 

be clogged. >>> Wash the fibre filters with warm 

water and dry.

Evaporator front side may be clogged. >>> Clean 

the front side of the evaporator.

The ventilation grills in front of the machine may 

be closed. >>> Remove any object in front of the 

ventilation grills that blocks air.

Ventilation may be inadequate because the are the 

machine is installed in is too small. >>> Open the 

door or windows to prevent the room temperature 

from rising very high.

A lime layer may have accumulated on the 

humidity sensor. >>> Clean the humidity sensor.

Excessive amount of laundry might be loaded. 

>>> Do not load the drying machine excessively.

Laundry might not have been wrung adequately. 

>>> Perform a higher speed wringing on the 

washing machine.
Clothes come out damp after drying.
A program not suitable for the laundry type may 

have been used.>>> Check the maintenance 

labels on the clothes and select a program 

suitable for the clothes’ type or use time programs 

as extra.

Fibre filter (interior and exterior filter) pores may be 

clogged. >>> Wash the filters with warm water 

and dry.

Evaporator front side may be clogged. >>> Clean 

the front side of the evaporator.

Excessive amount of laundry might be loaded. 

>>> Do not load the drying machine excessively.

Laundry might not have been wrung adequately. 

>>> Perform a higher speed wringing on the 

washing machine.
Drying machine does not turn on or program 

cannot be started. Drying machine does not run 

after it is configured.
Power plug might be unplugged. >>> Make sure 

the power cord is plugged in.

Loading door might be open. >>> Ensure that the 

loading door is properly closed.

A program might not be set or Start / Pause /

Cancel button might not be pressed. >>> Check 

that the program is set and it is not in Pause 

position..

Child lock may be activated. >>> Turn off the child 

lock.
Program terminated prematurely for no reason.
Loading door might be closed completely. >>> 

Ensure that the loading door is properly closed.

There might be a power outage. >>> Press the 

Start / Pause / Cancel button to start the program.

Water tank may be full. >>> Empty the water tank.

Clothes have shrunk, hardened or spoiled.
A program not suitable with the laundry type might 

have been used. >>> Check the maintenance 

labels on the clothes and select a program 

suitable for the clothes.

Water drips from the loading door.

Fibres might have gathered on the inner sides of 

the loading door and the loading door gasket. >>> 

Clean the inner surfaces of the loading door and 

the loading door gasket surfaces.
Loading door opens by itself.

Loading door might be closed completely. >>> 

Push the loading door until the closing sound is 

heard.

Water tank warning symbol is on/flashing.
Water tank may be full. >>> Empty the water tank.

Water discharge hose might have collapsed. >>> 

If the product is connected directly to the water 

drain check the water discharge hose.
The lighting inside the drying machine does not 

turn on. (In models with lamp)
The drying machine might not have been turned 

on using On/Off button. >>> Check that the 

drying machine is turned on.

Lamp might be malfunctioning. >>> Contact 

Authorized Service to replace the lamp.
Anti-crease icon is lit.

Anti-Crease mode that prevents the laundry in the 

drier to crease may be activated. >>> Turn the 

drier off and remove the laundry.

Fibre filter cleaning icon is lit.

Fibre filter (interior and exterior filter) may be 

unclean. >>> Wash the filters with warm water 

and dry..

A layer may be formed on the fibre filter pores that 

leads to clogging. >>> Wash the filters with warm 

water and dry.

An audible warning is heard from the machine

Fibre filters may not be inserted. >>> Insert the 

interior and exterior filters to their places.

Filters of the machine may not have been 

installed.>>> Install the fibre filters (internal and 

external) or the environmentally-friendly filter to 

their housing.