background image

Dishwasher / User’s Manual

13 / 44 EN

Preparation

Remove the test 

strip from the 

packet.

Turn on the tap and 

let the water run for 

about a minute.

Hold the test strip in 

the water for about 

a second.

Remove the test 

strip from the water 

and shake it.

Wait for 1 minute. The test strip shows 

you the hardness 

level.

After determining hardness level of the supply water:

1. Turn on the machine, press Time Delay and P+/P keys simultaneously. After the countdown 

(3,2,1) is displayed keep the keys pressed for a while.

2. Press P+/P  key to activate the (r..) position.

3. Using Time Delay key, adjust water hardness level according to the hardness of the supply 

water. See “Water hardness level adjustment table” for correct setting.

4. Press On / Off key to save the setting.

Water hardness level adjustment table

Hardness 

Level

English Water 

Hardness °dE

German Water 

Hardness °dH

French Water 

Hardness °dF Water Hardness Level Indicator

0th Level

0-5

0-4

0-8

Press the Time Delay key to switch the water hardness level 

to position 1. (r1)

1st Level

6-9

5-7

9-13

2nd Level

10-15

8-12

14-22

Press the Time Delay key to switch the water hardness level 

to position 2. (r2)

3rd Level

16-19

13-15

23-27

Press the Time Delay key to switch the water hardness level 

to position 3. (r3)

4th Level

20-24

16-19

28-34

Press the Time Delay key to switch the water hardness level 

to position 4. (r4)

5th Level

25-62

20-50

35-90

Press the Time Delay key to switch the water hardness level 

to position 5. (r5)

In order to protect your glassware against glass corrosion in an optimal way, you have to 

perform the same hardness settings, which you have made in the control panel, with the 

regeneration setting switch.

For example, if you have adjusted to “3rd level” in the control panel, also set the regeneration 

adjustment switch to 3rd level.

Regeneration Adjustment Switch

0th Level 1st Level 2nd Level 3rd Level

4th Level 5th Level

1

1

2

3

4

5

Summary of Contents for DIN26420















































Reviews: