Beko DIS28120, User Manual

30

Dishwasher / User’s Manual

/41 EN

Operating the product

Changing the settings while Time 

Delay function is active

While the Time Delay function is activated, 

you cannot make changes in the washing 

programme, auxiliary functions or the 

duration of delay time.

C

Programme and auxiliary 

functions cannot be set/

changed after the programme 

has started.

To cancel the Time Delay function

Open the door of the product Press and 

hold the Programme Selection / Programme 

Cancel keys for 3 seconds. After the 3 - 

2 - 1 countdown, 0:01 is displayed, close 

the door of the product and wait for the 

draining process complete. Draining is 

completed in 2 minutes and the machine 

gives an audible warning when it is 

completed. 

C

You can select and start a 

new programme following the 

cancellation of Time Delay 

function.

C

Time Delay function cannot be 

set after the programme starts.

Starting the programme

Close the door of your machine to start it 

after selecting the programme and auxiliary 

functions.

C

Your machine performs water 

softening depending on the 

hardness level of the supply 

water. Washing time can 

change while the programme 

is running depending on the 

ambient temperature where 

your machine is installed, 

temperature of the supply 

water and amount of the dishes.

C

Pay attention not to open the 

door of the machine when it is 

running. There may be a rush of 

vapour when you open the door 

of your machine; be careful.

C

The machine will remain silent 

in pause mode for some time 

in order to remove the water 

from the machine and on the 

dishes completely and to have 

the water softener cleaned, and 

then it will resume running in 

drying mode.

Cancelling the programme

Open the door of the product Press and 

hold the Programme Selection / Programme 

Cancel keys for 3 seconds. After the 3 - 

2 - 1 countdown, 0:01 is displayed, close 

the door of the product and wait for the 

draining process complete. Draining is 

completed in 2 minutes and the machine 

gives an audible warning when it is 

completed. 

C

There might be residues of 

detergent or rinse aid in the 

machine and/or on the pieces 

being washed depending on the 

step the programme you have 

cancelled was in.

Salt indicator ( )

Please check the salt indicator on the 

display to see whether there is adequate 

amount of softening salt in the dishwasher 

or not. You need to refill the salt reservoir 

with salt whenever salt indicator appears 

on the display of your machine.

C

Adjusting the water hardness 

level is explained in Water 

Softening System section.