20 / 56 EN
Dryer / User Manual
Operating the product
5.6 Auxiliary functions
Audio alarm
An audio alarm is heard when the program is completed
in the tumble drier. If you do not want to hear the audio
alarm, please press the “Audio Alarm” button. When you
press the audio alarm button, the light turns on and you
hear no alarm at the completion of program.
C
You may select this function before or after
the program starts.
5.7 Warning indicators
C
Warning indicators may vary depending on
the model of your tumble drier.
Filter cleaning
The warning indicator turns on to show that the filter
needs to be cleaned.
Water tank
The warning indicator turns on to show that the water
tank needs to be drained.
If the water tank fills during the operation of program,
warning indicator flashes and machine pauses. In
such a case, drain the water in water tank and start
the program by pressing Start/Pause button. Warning
indicator turns off and program is resumed.
Delay time
If you prefer to dry your laundry after a certain period of
time, you may delay the start of program up to 3, 6 or 9
hours thanks to the delay function.
Open the loading door, and put the laundry in.
Select the drying program.
•
By pressing the Delay time selection button, set
the desired delay time. When the Delay time button
is pressed one more time, 3-hour delay is selected
and relevant indicator light turns on. When the
same button is pressed again, 6-hour delay is
selected, and one more pressing causes 9-hour
delay. If the delay time button is pressed once
more, the delay is cancelled.
•
After the selection of Delay time, delayed operation
is started for the selected program by pressing
“Start/Pause” button.
C
Laundry may be added or removed during
the delay time. At the end of countdown
for Delay Time, Delay Time warning
indicator turns off and drying starts.
Changing the delay time
If you want to change the time during countdown:
•
Cancel the program by turning On/off/program
selection button. Repeat the Delay time selection
process after selecting the desired program.
Cancelling the delay time function
If you want to cancel the delay time countdown and start
the program immediately:
•
Cancel the program by turning On/off/program
selection button. Press the “Start/Pause” button
after selecting the desired program.
5.8 Starting the program
Start the program by pressing the Start/Pause button.
Indicators of Start/Pause/Ready and Drying turn on to
show that program has started.
5.9 Child Lock
There is a child lock in the tumble drier that prevents the
program flow from being affected when the buttons are
pressed during operation of program. When the Child
Lock is active, all buttons on the panel are disabled
except for the On/off/program selection button.
In order to activate the child lock, press and hold the
Delay time and Audio alarm buttons spontaneously for
3 seconds.
Once the program is completed, the child lock must
be disabled to start a new program or intervene in
the program. Press and hold the same buttons for 3
seconds to disable the child lock.
C
When the Child Lock is enabled, child lock
warning indicator on the display turns on.
C
Child lock is disabled when the tumble
drier is turned off and turned on again by
using the On/off/program selection button.
C
Child lock is disabled when the machine
is turned off and turned on again by using
the On/off/program selection button.
When the child lock is active:
If the position of program selection button is changed
while the tumble drier is running or paused, indicator
symbols do not change.
C
When the program selection switch is
turned while the tumble drier is running
and child lock is active, two beeps are
heard. If the child lock is cancelled without
restoring the program selection to switch
to its previous position, program is ended
because the position of program selection
switch is changed.
