22
There are rust
stains on cutlery
The affected items
are not corrosion
resistant.
A program
was not run after
dishwasher salt was
added. Traces of
salt have gotten
into the wash cycle.
Always run the quick wash program.
without any crockery in the dishwasher
and without selecting the Turbo
function (if present), after adding
dishwasher salt.
The lid of the softer
is loose.
Check the lip. Ensure the fix is fine.
Avoid washing items that are not
corrosion resistant in the dishwasher.
Problem
Possible Causes
What To Do
Knocking noise
in the wash cabinet
The spray arm is
knocking against
an item in a basket.
Interrupt the program, and rearrange
the items which are obstructing the
spray arm.
Rattling noise
in the wash cabinet
Item of crockery are
loose in the wash
cabinet.
Interrupt the program, and rearrange
the items of crockery.
Knocking noise in
the water pipes
This may be caused
by on-site installation
or the cross-section
of the piping.
This has no influence on the
dishwasher function. If in doubt,
contact a qualified plumber.
The dishes
are not clean
The dishes were not
loaded correctly.
See PART
Ⅱ
“Preparing And Loading
Dishes”.
The program was
not powerful enough.
Select a more intensive program.
Not enough detergent
was dispensed.
Use more detergent, or change
your detergent.
Item are blocking
the path of spray arms.
Rearrange the items so that the spray
can rotate freely.
The filter combination in
the base of wash cabinet
is not clean or is not
correctly fitted.
This may cause the spray
arm jets to get blocked.
Clean and/or fit the filter correctly.
Clean the spray arm jets.