background image

17/EN

 You can put about 2 kg of softening 

salt into the salt reservoir.

5.  Replace the lid and tighten it when the 

reservoir is full.

 You need to add salt right before 

starting the machine. Thus, the 
overflowing salty water will be flushed 
immediately, preventing the risk 
of corrosion in machine. In cases 
where you would not start washing 
immediately, run your machine empty 
in the shortest programme.

 Since different salt brands in the 

market have different particle sizes and 
since the water hardness may vary, 
dissolution of the salt in water may 
take a couple of hours. Therefore, Salt 
Indicator remains on for a while after 
adding salt into the machine.

Detergent

You can use powder, liquid/gel or tablet 
detergents in the machine.

 Only use detergents produced 

particularly for use with dishwashers. 
Note that detergents that contain 
chlorine and phosphate can be harmful 
for the environment. Liquid detergents 
without chlorine may not remove tea 
and coffee stains from cups.

Adding detergent

 Pay attention to the warnings on the 

detergent packaging to get better 
washing and drying results.  Contact 
the manufacturer of the detergent for 

Adding salt

Water softening system needs to be 
regenerated in order for the product 
to  operate with the same performance 
continuously.  Dishwasher salt is used for 
this purpose. 

 Use only special softening salts 

produced particularly for the 
dishwashers in your machine.

 It is recommended to use granule- or 

powder-formed softening salts in the 
water softening system. Do not use 
salts that do not completely dissolve 
in water such as table salt or rock 
salt.  Otherwise the performance of the 
system may deteriorate in time.

 Salt reservoir will be filled with water 

when you start the product.  For this 
reason, add salt before operating the 
machine.

1.  Firstly, take the lower basket out to add 

softening salt.

2.  Turn the salt reservoir lid counter-

clockwise to open it (A).

3.   Add 1 liter of water to salt reservoir of 

your machine only in initial use.

4.  Fill the salt reservoir with salt by 

using the salt funnel (D). To speed up 
dissolution rate of salt in water, stir it 
with a spoon.

Summary of Contents for DVN04320B

















































Reviews: