background image

40/EN

There is a different odour in the machine

  A new machine has a peculiar odour. It will fade out after a couple of washes.

• 

Filters are clogged. >>> Check if the filter system is clean. Clean the filter system 
regularly as illustrated in section “Cleaning and Care”.

• 

Dirty dishes are kept in dishwasher for 2-3 days. >>> If you are not going to start 
the machine right after you have put the dishes into it, remove the remnants on the 
dishes and run the Prewash programme without detergent every 2 days. In such 
cases, do not close the door of the machine completely in order to avoid odour build 
up in machine. You can also use commercially available odour removers or machine 
cleaners.

Rust, discoloration or surface deterioration occurs on dishes

• 

Salt leakage exists. >>> Salt may cause deterioration and oxidation on metal surfaces. 
Pay attention not to spill salt around the salt filling hole while adding salt. Make sure 
that the salt reservoir lid is tightly closed after finishing the filling process. Run the 
prewash programme to remove the salt that spilled inside the machine. Since the salt 
granules that will remain under the lid will dissolve during prewash, causing the lid 
loosen, check the lid once again at the end of the programme.

• 

Salty food remnants have remained on dishes for a long time.  >>> If cutlery soiled 
with such foods will be kept waiting in machine, dirt must be removed by prewash or 
dishes must be washed without being kept waiting.

• 

Electric installation is not grounded. >>>Check if your machine is connected to the 
actual grounding line. Otherwise, the static electric created in the product causes arcs 
on the surfaces of metal items creating pores, removing the protective cover on the 
surface and causing discoloration.

• 

Intensive cleansers such as bleaches are used. >>> Protective cover on metal 
surfaces gets damaged and looses its efficiency in time when it gets in contact with 
cleansers such as bleach. Do not wash your dishes with bleach.

• 

Metal items particularly knives are used for purposes other then their intended uses.  
>>> Protective cover on the edges of knives may get damaged when they are used for 
purposes such as opening cans. Do not use metal kitchen utensils out of their intended 
uses.

• 

Cutlery are made of low quality stainless steel. >>> Corrosion on such items is 
inevitable; they should not be washed in dishwashers.

• 

Kitchen utensils that are already corroded are washed in dishwasher. >>> Rust on a 
corroded item can migrate to other stainless steel surfaces and cause corrosion on 
those surfaces as well. Such items should not be washed in dishwashers.

Detergent remains in detergent dispenser.

• 

Detergent dispenser was damp when adding detergent. >>> Make sure that the 
detergent dispenser is dried well prior to filling it with detergent.

• 

Detergent is added long before the washing process. >>> Pay attention to add 
detergent shortly before start-up of the washing.

Summary of Contents for DVN04320B

















































Reviews: