Beko DVTC 60 W, Installation & Operating Instructions And Drying Guidance

19

EN

Preparation and starting

1. Press the “On/Off” button.

2. Place the laundry in the machine.

3. Select the programme.

4. Close the loading door.

5. Press “Start/Pause/Cancel” button.

Cancelling a programme

A new programme can be selected and 

started after “Programme cancel” is 

activated in order to change the drying 

programme.

In order to cancel the selected 

programme, press “Start/Pause/Cancel” 

button for about 3 seconds. The “Filter 

cleaning and “0/ Anti-creasing” warning 

LEDs will light up at the end of this period 

for reminding purposes.

Adding laundry

In order to add laundry after the start-up 

of the programme:

1. Press “Start/Pause/Cancel” button. 

2. Open the loading door and put the 

laundry in.

3. Close the loading door.

4. Press “Start/Pause/Cancel” button to 

start the programme.

7   

Quick

 instructions for daily use

Changing the programme after the 

programme has started

You can use this feature after your 

machine has started to dry your clothes 

under higher or lower temperatures. 

Press and hold the “Start/Pause/Cancel” 

button for about 3 seconds to switch 

the machine into the “Cancel” status in 

order to change the programme. Change 

the programme and press “Start/Pause/

Cancel” button to start it.

After the programme is finished

The “0/Anti-creasing” and “Filter cleaning” 

warning LEDs on the programme 

follow up indicator will light up when 

the programme comes to an end. The 

door can be opened and the machine 

becomes ready for a second cycle.

1. Press the “On/Off” button to shut 

down the machine.

2. Take out the laundry from the machine.

3. Check if there are any foreign objects 

in the machine.

4. Clean the filter after drying.