Beko DVTC 60 W, Installation & Operating Instructions And Drying Guidance

9

EN

B

  The air ventilation hose should not be 

connected to the chimney of a stove or 

a fireplace. 

B

  Do not operate your machine at the 

same time with heaters such as a coal 

or gas stove. Airflow may cause the 

chimney to flare up. Airflow may cause 

the chimney to flame up.

Adjusting feet

In order to ensure that your product 

operates more silently and vibration-

free, it must stand level and balanced on 

its feet. Front feet of your product can 

be adjusted. Balance the machine by 

adjusting the feet.

1.  Loosen the feet by hand.

2.  Adjust the feet until the product stands 

level and firmly on the floor.

C

 Do not use any tools to loosen the 

adjustable feet, otherwise, they can be 

damaged.

C

 Never remove the adjustable feet from 

their housings.

2 plastic pieces supplied along with the 

user manual prevent your machine from 

slipping on wet and slippery surfaces. To 

install the plastic parts:

1.  Tilt your product to backwards.

2.  Fit the plastic parts on to the front 

adjustable feet. Press on the plastic 

parts to snap them into their seating.

3.  Check the balance of your product 

again and readjust the adjustable feet if 

necessary.

First use

•  To have the product ready for 

operation before calling the authorised 

service agent, make sure that its 

location and power supply installations 

are appropriate. If they are not, call 

a qualified electrician to have any 

necessary arrangements carried out.

•  Make sure that the power connections 

of the product are in accordance 

with the instructions given in relevant 

chapters of this manual. 

Disposing of packaging 

material

Packaging materials are dangerous to 

children. Keep packaging materials in 

a safe place out of reach of children. 

Packaging materials of your product are 

manufactured from recyclable materials. 

Sort and dispose of them in accordance 

with recycled waste instructions. Do not 

dispose of them with normal domestic 

waste.

Transportation of the machine

1. Unplug the machine from the mains.

2. Remove the water drain (if any) and 

chimney connections.

3. Drain water remained in the machine 

completely before transportation.

Disposing of the old machine

Dispose of your old machine in an 

environmentally friendly manner.

Refer to your local dealer or solid waste 

collection centre in your area to learn how 

to dispose of your machine.

Before disposing of your old machine, 

cut off the power cable plug and make 

the loading door lock unusable to avoid 

dangerous conditions to children.