Beko E1 CHASSIS, Service Manual

7

Starting with Program P1, tune in the first 
channel as follows: 

Use the Program up button to select 
SEARCH.Press the Volume up or 
Volume down button to start the 
tuning search. The search arrow will 
appear. When the search finds a 
strong searching. The picture will 
appear, channel signal it will stop.  
 
Identify which channel you are 

watching (BBC 1, ITV 1 etc.) and decide which 
program number you want it to be. 
 

Use the Program down button to 
select PROGRAM NO. 
 
Use the Volume up/down buttons to 
select the program number. 
 
Use the Program down button to 
select STORE. Press the OK button 
and STORED will appear on the 
STORE line. 
 
You have now stored the first 
channel. 
 
Use the Program up button to select 
again SEARCH and continue the 
tuning procedure until you have 

tuned in all the programmes you want or the 
television can receive.  
 

b) If you know the channel number. (Tuning 
with channel numbers) 

Press the OK button to select “S” for 
cable channels and “C” for terrestrial 
broadcast. 
 
Use Volume up/down button to 
select the channel number or enter 
the channel number using the 
Numeric buttons.  
 
Use the Program down button to 
select PROGRAM NO. 
 

Enter the desired program number 
by using the Ten key program 
buttons 
Use the Volume up/down buttons to 
select the program number. 
 
Use the Program down button to 
select STORE. Press the OK button 
and STORED will appear 
on the STORE line. The channel will 
be stored with the program number 
you desired. 
 
You have now stored the first 
channel.  
Use the Program up button to select 
again CHANNEL and continue the 
tuning procedure until you have 
tuned in all the programmes you 
want or the television can receive. 

To exit the SETUP menu press the 
TXT button. 
 
 

Please note 

The system will displayed automatically on 
SYSTEM row i.e.BG, L, I, DK depending the 
receiving broadcasting system of the country. In 
some countries the broadcasting system can be 
both in BG/DK or BG/LL´.Only the TV sets 
produced with Pal Secam BG/DK or Pal Secam 
BG/LL´ systems can receive both BG/DK or 
BG/LL´ broadcasts.  

Please note 

If you do not press any buttons for 15 seconds 
the TV will exit the menu system. 
 

Automatic Tuning (Autoprogram) 
 

Enter the SETUP menu as before.