EN
13
17.
Fit front top panel plastic hinge
covers on the opposite sides. (16)
18.
Remove the handle cover
gently taking care not to damage the
appliance.(17)
19.
Unscrew and remove the
handle (18). Do not unscrew the
yellow coloured screws!
20.
Rotate 180 degrees and
fit handle to the other side after
removing hole plugs gently.(19,20)
21.
Fit the handle cover.(21)
22.
Adjust the two front feet if
necessary.
23.
Check that door opens and
closes easily, it is aligned correctly and
there are no gaps allowing air into the
cabinet. If there are gaps between
the door seal and the cabinet, adjust
the door seal by gently pulling away
from the door using fingers.
24.
Check that all the hinge screws
are tightened. Avoid over tightening
the screws.
25.
Put all items, fittings back in
the appliance.
26.
Wait for at least 4 hours to
allow the system to settle before
switching on.
27.
Once the correct storage
temperatures have been reached in
the appliance, put back all the food.