Beko FFP1577, Instructions Of Use

EN

8

1.

The space in the room where the

appliance is installed must not be

smaller than 10 cubic metres.

2.

This appliance has been designed

to operate in ambient temperatures

up to 

43

degrees C (109 degrees F)

and is equipped with Freezer Guard

technology which ensures that even

if the ambient temperature falls to

-15

 degrees C

, frozen food in the

freezer does

not thaw thanks to this.

So you may

then install your appliance

without

having to worry about frozen

food in

the freezer being spoilt.

3.

Do not place the appliance near

cookers, radiators or in direct sunlight

as this will cause your appliance to

work harder. If installed next to a

source of heat or freezer, maintain the

following minimum side clearances:

From Cookers    

50 mm 

(2”)

From Radiators  300 mm (12”) 

From Freezers

25 mm 

(1”)

4.

Refer to "Maintenance and

cleaning" section to prepare your

appliance for use.

5.

A special receptacle is supplied to

store the mains plug during transit.

The receptacle is fixed at the back of

the cabinet, on the side of the

compressor (see diagram). Gently

remove the plug from the receptacle.

Never pull the mains cord, you may

damage the appliance. In the case of

transportation, ensure you locate the

plug in the receptacle provided to

avoid transit damage.

Installation instructions

6

. Attach 2 plastic wedges as

illustrated

below. Plastic wedges are

intended to

keep the distance which

will ensure the

air circulation

between your 

appliance

and the

wall. (The picture is drawn up

as

a

representation and it is not

identical

with your product).

7

.

The appliance should be

located on a smooth surface. The two

front feet can be adjusted as required.

To ensure that, your appliance is

standing upright adjust the two

front

feet by turning clockwise or

anti-

clockwise, until the product is in

firm

contact with the floor. Correct

adjustment of feet avoids excessive

vibration and noise.