24
Should the light fail to work, proceed as
follows:
1. Switch off at the socket outlet and pull out
the mains plug.
• Remove all shelves and drawers for easy
access.
2. Use a flat tipped screwdriver to gently
remove the light diffuser cover by inserting
the blade to prise off each side. Take care not
to damage the plastic cover and inner liner.
3. First check that the bulb hasn't worked
loose by ensuring that it is screwed securely
in the holder. Replace the plug and switch on.
If the bulb works, replace the light cover by
inserting the rear lug and pushing up to locate
the front two lugs.
4. If the light still fails to work, switch off at
the socket outlet and pull out the mains plug.
Replace the bulb with a new 15 watt (max)
screw cap E14 (SES) bulb.
5. Carefully dispose of the burnt-out light bulb
immediately.
Replacement light bulb can easily be obtained
from a good local electrical or DIY store.
Replacing the Interior Light
Bulb
EN
Summary of Contents for GNE 46102 B
Page 1: ...GNE 46102 E GNE 46102 B GNE 46102 X No Frost ...
Page 2: ......
Page 35: ......
Page 36: ...48 5321 0000 ...