Beko GNEV021APW, Installation & Operation Manual

EN

9

Electric connection

Connect your refrigerator to a grounded 
socket which is being protected by a 
fuse with the appropriate capacity.

Important:

B

 The connection must be in compliance 

with national regulations.

B

 The power cable plug must be easily 

accessible after installation

.

B

 Voltage and allowable fuse protection 

are specified in the “Technical 
Specifications” section.

B

 The specified voltage must be equal to 

your mains voltage.

B

 Extension cables and multiway plugs 

must not be used for connection.

B

 A damaged power cable must be 

replaced by a qualified electrician.

B

 The appliance must not be operated 

before it is repaired! There is danger of 
electric shock!

Disposing of the packaging

A

The packing materials may be 

dangerous for children. Keep the 
packing materials out of the reach of 
children or dispose them of by classifying 
them in accordance with the waste 
instructions. Do not dispose them of 
along with the normal household waste.

The packing of your refrigerator is 
produced from recyclable materials.

Disposing of your old 

refrigerator

Dispose of your old machine without 
giving any harm to the environment.

A

 You may consult your authorized dealer 

or waste collection center of your 
municipality about the disposal of your 
refrigerator

.

A

 Before disposing of your refrigerator, 

cut out the electric plug and, if there 
are any locks on the door, make them 
inoperable in order to protect children 
against any danger.

Placing and Installation

B

 Caution: Never plug the refrigerator 

into the wall outlet during installation. 
Otherwise, risk of death or serious injury 
may arise.

1. Install your refrigerator to a place that 
allows ease of use.

2. Keep your refrigerator away from 
heat sources, humid places and direct 
sunlight.

3. There must be appropriate air 
ventilation around your refrigerator in 
order to achieve an efficient operation. 
If the refrigerator is to be placed in a 
recess in the wall, there must be at least 
5 cm distance with the ceiling and at 
least 5 cm with the wall.

If the floor is covered with a carpet, your 
product must be elevated 2.5 cm from 
the floor.

4. Place your refrigerator on an even 
floor surface to prevent jolts.

5. Do not keep your refrigerator in 
ambient temperatures under 10°C.

Floor balance adjustment

If your refrigerator is unbalanced;

You can balance your refrigerator by 
turning the front legs of it as illustrated 
in the figure. (See Figure A) The corner 
where the leg exists is lowered when 
you turn in the direction of black arrow 
and raised when you turn in the opposite 
direction. Taking help from someone to 
slightly lift the refrigerator will facilitate 
this process.