12 / EN
Hood / User Manual
5
Cleaning and maintenance
5.1 Cleaning
•
Particularly do not neglect to clean your hood
immediately after you have made frying.
•
Use a soft cloth soaked with liquid detergent to
clean the outer surface of your hood.
•
Never use abrasive or scratching materials for
cleaning.
•
You may use the cleaning agents commercially
available for persistent grease etc. by follow-
ing the warnings on the product. In order not
the scratch the brushed steel body, wipe in the
same direction with the bush trace.
•
Do not use cleaning agents containing hydro-
chloric acid, bleach or abrasive powders in order
to maintain the surface quality of your product.
Use a cloth dampened in soapy water or special
stainless steel cleaning spray for stainless steel
steel surfaces. Remove the protective foil on the
appliance.
A
Caution!
You may cause a fire if you
do not follow the instructions on the
cleaning and replacement of the fil-
ters of your hood.
5.2 Fat filter
The hood is equipped with aluminium filter stop-
ping the particles of fat emitted in course of
cooking. To remove the filter, move the clamps in
the direction of arrows (Fig.7). The filter shall be
cleaned manually by its immersion into the water
with dish washing liquid for approx. 15 minutes,
under the temperature equal to 40-50ºC. After
15 minutes, wash and accurately rinse the filter.
The filter must be dry before its installation in the
hood. It is also possible to wash the filter in the
dish washing machines. In course of washing, the
filter colour may change, which does not influence
its filtering characteristics. The failure to clean the
filter regularly reduces the hood performance, and
may cause the fire. The filter shall be cleaned at
least every 35 hours of hood operation.
5.3 Coal filter
The hood may be equipped with the coal filter. The
coal filter is used when the hood is not connected
to ventilation duct only. The filter shall be installed
on the fan body, like it is shown in the drawing
(Fig.10). The coal filter shall be replaced every 6
months.
C
Do not wash or regenerate the coal
filter.
1
2
1
2
Fig.10
Coal filter replacement
filter installation
Mark
Mark
filter removal
