10 / EN
Cooker Hood / User Manual
2
Safety warnings
2.4 Risk of burns, electric
shock danger
A
DANGER:
•
Allow the appliance to cool
before cleaning or maintenance.
Disconnect the fuse or disconnect
the appliance from the main
socket.
•
There is a risk of damage due to
moisture infiltration of electronic
parts. Do not clean the controls
with a damp cloth.
•
Improper cleaning may damage
the surface. When cleaning
stainless steel surfaces always
follow the furbishing direction. Do
not use stainless steel cleaning
products when cleaning controls.
•
Aggressive cleaning or abrasive
cleaning products may damage
the surface. Never use chemical
aggressive or abrasive cleaning
agents.
•
There is a risk of damage due to
condensation reflux. Install the air
outlet tubes downward from the
appliance (1 ° slope).
2.5 Risk of fire and physical
injury!
A
DANGER:
If the repairs are not
performed in accordance with the
regulations or the requirements,
turn off the fuse or disconnect
the power cord of your machine.
Repairs must only be carried
out by the authorized technical
service representative or specialist
personnel.
C
If the appliance is damaged or not
working, disconnect the fuse or
disconnect the appliance power
cord and call an authorized service
center.
C
If the power cord is damaged, it must
be replaced by the manufacturer, the
technical service representative or
personnel with similar qualifications
to avoid any danger.
C
If the bulbs do not work, disconnect
the fuse or disconnect the appliance
power cord. To avoid overloading
other light bulbs, immediately
replace the disfunctional bulbs (wait
until the lamp is cool).
A
CAUTION:
When used with
cooking machines, accessible parts
may become hot.
A
DANGER:
The air outlet of this
device must never be connected
to flue gas discharge ducts from
other gas machines or other gas
appliances.