10 / EN
Induction Hob / User Manual
2
General information
•
The single hob is equipped with overheating
protection. If the cookware becomes too hot,
the appliance switches off automatically and
the error message “E5” or “E6” appears on the
display. Wait a few minutes and let the hob cool
down if the appliance gets too hot.
•
The appliance is then free to be used again
without any problem.
Do not touch the hot surfaces
during and after use. The hob
heats up intensely and reach-
es high temperatures -it pos-
es a burn risk.
2.6 Setting the power
The hob can be set from 200 W up to 2.000 W.
•
Press the temperature/power selection button.
The indicator will light up. The “1200” message
will appear on the display when suitable cook-
ware is placed on the hob.
•
Touch the +/- buttons to increase or decrease
the power.
•
Touch the - button twice quickly to the min
power 200W. Touch the + button twice quickly
to the max power 2000W.
2.7 Setting the temperature
The hob can be set from 60°C up to 240°C.
•
Press the temperature/power selection button.
The indicator will light up. “240C” will appear on
the display if you have placed suitable cookware
on the hob.
•
Touch the+/- buttons to increase or decrease
the temperature by the step of 5°C. Keep press-
ing the +/- buttons to increase or decrease the
temperature by step of 10 °C.
•
Touch the - button twice quickly to the min tem-
perature 60°C. Touch the + button twice quickly
to the max temperature 240°C.
2.8 Setting the timer
•
First set the power or temperature.
•
Press the timer button to activate the timer
mode. The timer symbol will light up, as will the
numbers on the display.
•
Touch the +/- buttons to increase or decrease
the amount of time being set. Press and hold
the button to increase or decrease the time in
10-minute increments. You can set the timer for
1 to 180 minutes.
•
Touch the - button twice quickly to the min time
0 minute. Touch the + button twice quickly to
the max time 180 minutes.
•
After setting the time, press the timer button
again and the countdown will start.
•
Once the set time has elapsed, the appliance will
stop heating and switch itself off.
•
Automatic shutdown: If the appliance is running
continuously without a set timer, it will auto-
matically switch itself off 2 hours after being
switched on. In timer mode, automatic shut-
down is overridden.
C
The LED display will show the de-
fault value “OFF”.
2.9 Locking the appliance
The appliance can be locked to prevent it being op-
erated unintentionally.
•
Press the + and - buttons simultaneously to lock
the appliance.
•
In this mode, only the on/off button can be used
to turn off the appliance. All other functions are
locked.
•
Press and hold the + and - buttons simultane-
ously for 3 seconds to cancel the function.
