Beko HSA46330, Instructions Of Use

Replacing the interior light bulb 

If the lamp burns out, disconnect the 
appliance from the mains. Take out the 
lamp trim. Make sure the lamp is screwed 
correctly. Plug in the appliance again. If 
the lamp still does not go on, replace it 
with another one model E14-15W. Mount 
back the lamp trim in its place. 
The lamp(s) used in this appliance is not 
suitable for household room illumination. 
The intended purpose of this lamp is  to 
assist the user to place foodstuffs in the 
refrigerator/freezer in a safe and 
comfortable way. 
The lamps used in this appliance have to 
withstand extreme physical conditions 
such as temperatures below -20°C. 

7 

EN 

Instruction for use 

I nsi de  cle a ni ng  

Before starting the cleaning, unplug the 
appliance from the mains. 



  It is advisable to clean the appliance 

when you defrost it. 



  Wash the inside with lukewarm water  

where you add some neutral detergent. Do 
not use soap, detergent, gasoline or 
acetone which can leave a strong odour.  



  Wipe with a wet sponge and dry with a 

soft cloth. 

During this operation, avoid the excess of 
water, in order to prevent its entrance into 
the thermal insulation of the appliance, 
which would cause unpleasant odours. 
Do not forget to clean also the door gasket 
especially the bellow ribs, by means of a 
clean cloth.  

O uts i de  clea ning  



  Clean the outside of the freezer by 

means of a sponge soaked in soapy warm 
water, wipe with a soft cloth and dry. 



  The cleaning of the outside part of the 

refrigerating circuit (motorcompressor, 
condenser, connection tubes) will be done 
with a soft brush or with the vacuum-
cleaner. During this operation, please take 
care not to distort the tubes or   detach the 
cables.  

Do not use scouring or abrasive 
materials ! 



 After having finished the cleaning, 

replace the accessories at their places 
and plug in the appliance.