STAND BY
If this Option is OFF, the TV will stay in Stand By mode after a Power On. If this Option is ON, the TV will
recall its last stand by status before the Power Off, and switch on from Stand By automatically, if the last
state was ‘Stand by On’.
MSP CARRIER MUTE
If this option is ON, sound processor’s carrier mute functionality will be enabled. The MSP will mute the
sound automatically if the signal quality is bad. Setting this option Off will disable this functionality.
WSS RF / WSS SCART
Automatic picture format switching for WSS and Pin8 can be enabled or disabled through this option.
If WSS SCART is set to OFF, AUTO picture format mode will be disabled for SCART1 and SCART2
modes. Pin8 source switching will still be operational, but no picture format changes from Pin8 voltage
level will be ignored.
ATS
If this option is set to ON, TV will display Country Selection menu in the next start. After some country is
selected, the user will be prompted for the start of AutoProgramming process.
ADJUSTMENTS
This sub-menu contains numeric adjustments. These items are:
•
WHITE
R
•
WHITE
G
•
WHITE
B
•
PRESCALE
FM
•
PRESCALE
NICAM
•
PRESCALE
SCART
•
HOTEL
VOLUME
WHITE R / WHITE G / WHITE B
These are used for color bias adjustment. Unlike other items in the service menu, changes will take effect
immediately.
PRESCALE FM / PRESCALE NICAM / PRESCALE SCART
These are prescale values that will be used for the initialization of the sound processor (MSP), at the next
switch on.
HOTEL VOLUME
This value is used as the volume limit, when the Hotel Mode is on.