QWIK-PURE 100
12
1 Condensate inlet
2 Pressure relief chamber
3 Cartridge
4 Water outlet
5 Sample port (service valve)
Function • Descrizione del funzionamento
Fonctionnement • Descrição de funcionamento
english
Application aspects:
•
The OEKOSORB cartridge is de-
signed for most modern lubricants,
if your system creates a stable emul-
sion, contact BEKO.
•
The electronically level-controlled
BEKOMAT condensate drain should
be installed to ensure optimum con-
densate discharge.
Condensate discharge by hand or by
means of a time-controlled solenoid
valve may lead to the formation of
stable emulsions or overloading of the
QWIK-PURE unit.
• Maximum operating pressure of the
compressed-air system: 232 psig
The oil-contaminated condensate can
be discharged under pressure into the
QWIK-PURE oil-water separator (maxi-
mum system pressure 232 psig).
The overpressure is reduced in the pres-
sure-relief chamber (
2
) without creating
turbulence in the separation container.
The calmed condensate flows into the
filter stage where it passes slowly through
the cartridge (
3
).
The clean water is discharged through
the outlet connection (
4
).
2
4
1
3
