14 / EN
Rice Cooker / User Manual
4
Troubleshooting
No. Troubles
Causes
Remedy
1
The light is off. Heating plate
is not hot.
Circuit of electric rice cooker is
not connected to power sup-
ply
Inspect whether the switch, plug
and socket connector, fuse and lead-
ing wire of power supply are in good
condition and insert the plug reliably
Heating plate
is hot.
1. Wiring connection of indica-
tor light has loosened.
2. Indicator light is damaged.
It should be sent to an uthorized ser-
vice department for maintenance.
2
The light is on. Heating plate
is not hot.
1. Wiring in the middle has
loosened.
2. Electric-thermal tube has
burnt out.
3
Cooked rice is crude or time of
cooking is too long.
1. Cooking time is insufficient.
2. Heating plate is deformed.
3. Inner pot is declined and
one side is hanging in the
air.
4. There is foreign matter be-
tween inner pot and heat-
ing plate.
5. Inner pot is deformed.
1. Cook rice according to required
conditions.
2. The fine sand paper can be used
for correcting slight deformation
but the severly deformed one
should be sent to maintenance de-
partment for replacement.
3. Turn the inside pot lightly to make
it return to normal.
4. Clean it up with fine sand pape
5. Send to designated service depart-
ment.
4
Cook rice burnt or cannot keep
warm automatically
1. The keys of cooking rice and
lever link gear is not work-
ing.
2. The steel magnet tempera-
ture limiter is out of work.
3. The temperature controller
is burnt out wiring of it is
loosened.
It should be sent to an uthorized ser-
vicedepartment for maintenance.
5
Overflow
1. Installation of steam valve
is pour.
2. Steam reflux valve is de-
formed or has foreign mat-
ter.
1. Reinstall it according to installation
method in this instruction manual.
2. Wash it or remove foreign matter
as required.
Summary of Contents for RCJ17023B
Page 52: ...www beko com ...
