Beko RCSA330K30SN Instructions Of Use Download

Page: 14 / 32

Practical advice concerning the reduction of
the electricity consumption

1. Make sure that the appliance is located in
well-ventilated areas, far from any source of
heat (cooker, radiator etc.). At the same time,
the location of the appliance must be done in
such a way that it prevents it to be under the
direct incidence of the sunbeams.
2. Make sure that the food purchased in
refrigerated/frozen condition is placed into the
appliance as soon as possible, especially during
summertime. It is recommended to use thermal
insulated bags to transport the food home.
3. We recommend the thawing of the packets
taken out from the freezer compartment be
done in the refrigerator compartment. For this
purpose, the packet which is going to be thawed
will be placed in a vessel so that the water
resulting from the thawing does not leak in the
refrigerator compartment. We recommend you
to start the thawing at least 24 hours before the
use of the frozen food.
4. We recommend reducing the number of door
openings to the minimum.
5. Do not keep the door of the appliance open
more than necessary and make sure that after
each opening the door is well closed.

Information concerning the noise
and the vibrations which might
appear during the operation of the
appliance

1. The operation noise can increase during the
operation.
- In order to keep the temperatures at the
adjusted temperatures, the compressor of the
appliance starts periodically. The noise
produced by the compressor becomes stronger
when it starts and a click can be heard when it
stops.
- The performance and operation features of the
appliance can change according to the
modifications of the temperature of the ambient
environment. They must be considered as
normal.
2. Noises like liquids flowing or as being
sprayed
- These noises are caused by the flow of the
refrigerant in the circuit of the appliance and
comply with the operation principle of the
appliance.
3. Other vibrations and noises.

Instruction for use

- The level of noise and vibrations can be

caused by the type and the aspect of the floor
on which the appliance is placed. Make sure
that the floor does not have significant level
distortions or if it can yield to the weight of the
appliance (it is flexible).
- Another source of noise and vibrations is
represented by the objects placed on the
appliance. These objects must be removed from
the appliance
- The bottles and the vessels placed in the
refrigerator touching each other. In such cases
move the bottles and the vessels so that there is
a small distance between them.

Troubleshooting

If the appliance does not operate when
switched on, check;
• That the plug is inserted properly in the

socket and that the power supply is on. (To
check the power supply to the socket, plug
in another appliance)

• Whether the fuse has blown/circuit breaker

has tripped/main distribution switch has
been turned off.

• That the temperature control has been set

correctly.

• That the new plug is wired correctly, if you

have changed the fitted, moulded plug.

If the appliance is still not operating at all after
above checks, contact the dealer from whom
you purchased the unit.
Please ensure that above checks have been
done, as a charge will be made if no fault is
found.

The  symbol                    on  the  product  or  on
packaging  indicates  that  this  product  may  not
be treated as household waste. Instead it shall
be  handed  over  to  the  applicable  collection
point  for  the  recycling  of  electrical  and
electronic equipment. By ensuring this product
is  disposed  of  correctly,  you  will  help  prevent
potential  negative  consequences  for  the
environment  and  human  health,  which  could
otherwise  be  otherwise  be  caused  by
inappropriate  waste  handling  of  this  product.
For  more  detailed  information  about  recycling
of  this  product,  please  contact  your  local  city
office,  you  household  waste  disposal  service
or the shop where you purchased the product.