Beko SWRE 7512 XWW2, User Manual

4 / EN

Washing Machine / User’s Manual

•  Do not forget to close the loading door when leaving the room where the product is located.

•  Store all detergents and additives in a safe place away from the reach of the children by closing 

the cover of the detergent container or sealing the detergent package.

While washing the laundry at high temperatures, the loading door glass becomes 

hot. Therefore, keep especially the children away from the loading door of the 

machine while the washing operation is in progress.

1.4 Package information

•  Packaging materials of the product are manufactured from recyclable materials in accordance 

with our National Environment Regulations. Do not dispose of the packaging materials together 

with the domestic or other wastes. Take them to the packaging material collection points desig-

nated by the local authorities.

1.5 Disposing of the waste product

•  This product has been manufactured with high quality parts and materials which can be reu-

sed and are suitable for recycling. Therefore, do not dispose the product with normal domestic 

waste at the end of its service life. Take it to a collection point for the recycling of electrical and 

electronic equipment. Please consult your local authorities to learn the nearest collection point. 

Help protect the environment and natural resources by recycling used products. For children's 

safety, cut the power cable and break the locking mechanism of the loading door so that it will be 

non-functional before disposing of the product.

1.6 Compliance with WEEE Directive

This product complies with EU WEEE Directive (2012/19/EU).  This product bears a classifi-

cation symbol for waste electrical and electronic equipment (WEEE).

This product has been manufactured with high quality parts and materials which can be 

reused and are suitable for recycling. Do not dispose of the waste product with normal 

domestic and other wastes at the end of its service life. Take it to the collection center for 

the recycling of electrical and electronic equipment. Please consult your local authorities 

to learn about these collection centers. 

Compliance with RoHS Directive:

T

he product you have purchased complies with EU RoHS Directive (2011/65/EU).  It does not con-

tain harmful and prohibited materials specified in the Directive.

2 Installation

Refer to the nearest Authorised Service Agent for installation of the product. To make the product ready 

for use, review the information in the user manual and make sure that the electricity, tap water supply and 

water drainage systems are appropriate before calling the Authorized Service Agent. If they are not, call a 

qualified technician and plumber to have any necessary arrangements carried out.

C

Preparation of the location and electrical, tap water and waste water installations at the place of installation is 

under customer's responsibility.
Make sure that the water inlet and discharge hoses as well as the power cable are not folded, pinched or 

crushed while pushing the product into its place after installation or cleaning procedures.

B

WARNING: 

Installation and electrical connections of the product must be carried out by the Authorized 

Service Agent. Manufacturer shall not be held liable for damages that may arise from procedures carried out 

by unauthorized persons.

A

WARNING:

 Prior to installation, visually check if the product has any defects on it. If so, do not have it 

installed. Damaged products cause risks for your safety.

2.1 Appropriate installation location

•  Place the machine on a rigid floor. Do not place it on a long pile rug or similar surfaces.

•  Total weight of the washing machine and the dryer -with full load- when they are placed on top of each 

other reaches to approx. 180 kilograms. Place the product on a solid and flat floor that has sufficient 

load carrying capacity!

•  Do not place the product on the power cable.

•  Do not install the product at places where temperature may fall below 0ºC.

•  Place the product at least 1 cm away from the edges of other furniture.