Beko TAM6202B, User Manual

8 / 12  EN

Toaster / User Manual

3 

Operation

3.1 Preparation 

1. Remove all packaging and sticker materials and 

dispose of them according to the applicable 

local regulations.

2. Before using the appliance for the first time, 

clean the appliance (See the “Cleaning and 

care” section).

3. Make sure that the appliance is in an upright 

position and on a stable, flat, clean, dry and 

nonslip surface.

C

When using the appliance for the 

first time, smoke can develop due 

to production residues. However, 

this does not mean the appliance 

is defective. The first time you 

switch it on use the appliance as you 

normally would but without bread. It 

is recommended to use the medium 

setting of the browning control (3). 

Ensure for proper room ventilation.

3.2 Toasting 

1. Connect the power plug into the wall socket.
2. Insert only one slice of bread in each of the two 

bread slots (1).

3. Using the browning control (3) select the 

desired degree of browning between 1 and 7.

C

Pushing 1 from the browning control 

(3)  will give the lightest degree of 

browning and pushing 7 the darkest.

C

The browning degree can vary 

depending on the type of bread.

C

When toasting several slices of 

bread consecutively, the toaster will 

become hotter and therefore the 

bread will gradually become darker. 

Therefore select an appropriate 

browning degree. Let the toaster 

cool down after each toasting 

process for minimum 30 seconds.

C

The browing degree of one slice is 

darker than two slices, although 

the browning control (3)is set to the 

same level.

4. Press the start lever (2) until it automatically 

snaps into place.
– The toasting process begins. The indicator 

light of the stop button (6) and the button 

of the browning control level (3) illuminates 

during the toasting process.

C

If the power plug is not connected 

to the wall socket, the start lever (2)

does not snap into place.

C

The degree of browning can also be 

adjusted during the toasting process 

with the browning control (3).

5. The appliance automatically switches off as 

soon as the set degree of browning has been 

reached.
–  The start lever (2) springs back up and the 

stop button (6) light goes off. The toast slices 

are pushed upwards and can be taken out of 

the toaster.

C

To cancel the toasting process 

before it has finished, press the 

stop button (6). The start lever (2) 

springs back up and the toast slices 

can be taken out of the toaster.