Vacuum Cleaner / User Manual
7 / 62 EN
3
Usage
3.1 Intended use
The appliance has been designed for household
use and is not suitable for industrial use.
3.2 Attaching/removing the
hose
1. To attach the hose (15), push the hose cap (14)
to match it with the slot (a click sound will be
heard).
•
Projecting parts on the hose cap should be
aligned correspondingly.
2. To remove the hose (15), press the unlocking
buttons on the sides of the hose cap (14) and
pull the hose.
3.3 Attaching/removing the
telescopic tube
1. Attach the telescopic tube (3) to the handle (1).
2. Pull the telescopic tube (3) from the handle (1)
to remove it.
3. To adjust the length of the telescopic tube,
push the telescopic tube adjustment latch (4) in
the arrow direction and pull it from the end of it.
3.4 Attaching/removing the
parquet/carpet brush
1. Attach the telescopic tube (3) to the parquet/
carpet brush (5).
2. Pull the telescopic tube (3) from the parquet/
carpet brush (5) to remove it.
3.5 Adjusting the parquet/car-
pet brush
By pressing the adjustment latch located on the
parquet carpet brush (5);
•
Use "
" position for hard floors and parquet.
•
Use "
" position for rugs and carpets.
3.6 Operation
1. Plug in the appliance after pulling the power
plug located at the back of the appliance.
2. Press the on/off button (8) to switch on your
appliance.
3.6.1 Adjusting the suction
power
You can increase the suction power of the appliance
by turning the suction power adjustment knob (9)
located on the body of the appliance clockwise
according to the type of the surface to be cleaned.
To decrease the suction power, turn the suction
power adjustment knob anti-clockwise.
3.6.2 Vacuum control
You can lower the suction power of the parquet
carpet brush (5) by pulling backward the vacuum
adjustment control (2) located on the handle (1)
without the need to use the suction adjustment
knob (9) found on the appliance.
