background image

Washing Machine / User Manual

25 / EN

Problem

Reason

Solution

It does not rinse well.

The amount, brand and storage conditions of the 

detergent used are inappropriate.

•  Use a detergent appropriate for the washing 

machine and your laundry. Keep detergents 

closed in an environment free of humidity and 

do not expose them to excessive temperatures.

Detergent is put in the wrong compartment.

•  If detergent is put in the prewash 

compartment although prewash cycle is not 

selected, machine can take this detergent 

during rinsing or softener step. Put the 

detergent in the correct compartment.

Pump filter is clogged.

•  Check the filter.

Drain hose is folded.

•  Check the drain hose.

Laundry became stiff after 

washing. (**)

Insufficient amount of detergent is used.

•  Using insufficient amount of detergent for 

the water hardness can cause the laundry to 

become stiff in time. Use appropriate amount 

of detergent according to the water hardness.

Detergent is put in the wrong compartment.

•  If detergent is put in the prewash 

compartment although prewash cycle is not 

selected, machine can take this detergent 

during rinsing or softener step. Put the 

detergent in the correct compartment.

Detergent might be mixed with the softener.

•  Do not mix the softener with detergent. 

Wash and clean the dispenser with hot water.

Laundry does not smell like the 

softener. (**)

Detergent is put in the wrong compartment.

•  If detergent is put in the prewash 

compartment although prewash cycle is not 

selected, machine can take this detergent 

during rinsing or softener step. Wash and 

clean the dispenser with hot water. Put the 

detergent in the correct compartment.

Detergent might be mixed with the softener.

•  Do not mix the softener with detergent. 

Wash and clean the dispenser with hot water.

Detergent residue in the 

detergent drawer. (**)

Detergent is put in wet drawer.

•  Dry the detergent drawer before putting in 

detergent.

Detergent has gotten damp.

•  Keep detergents closed in an environment 

free of humidity and do not expose them to 

excessive temperatures.

Water pressure is low.

•  Check the water pressure.

The detergent in the main wash compartment got 

wet while taking in the prewash water. Holes of 

the detergent compartment are blocked.

•  Check the holes and clean if they are clogged.

There is a problem with the detergent drawer valves.

•  Call the Authorised Service Agent.

Detergent might be mixed with the softener.

•  Do not mix the softener with detergent. 

Wash and clean the dispenser with hot water.

Regular drum cleaning is not applied.

•  Clean the drum regularly. For this, please 

see 4.4.2.

Too much foam forms in the 

machine. (**)

Improper detergents for the washing machine are 

being used.

•  Use detergents appropriate for the washing 

machine.

Excessive amount of detergent is used.

•  Use only sufficient amount of detergent.

Detergent was stored under improper conditions.

•  Store detergent in a closed and dry location. 

Do not store in excessively hot places.

Some meshed laundry such as tulle may foam too 

much because of their texture.

•  Use smaller amounts of detergent for this 

type of item.

Detergent is put in the wrong compartment.

•  Put the detergent in the correct 

compartment.

Softener is being taken early.

•  There may be problem in the valves or in the 

detergent dispenser. Call the Authorised 

Service Agent.

Summary of Contents for VOLTAS WFL6010VPWW

































Reviews: