background image

26 / EN

Washing Machine / User Manual

Problem

Reason

Solution

Foam is overflowing from the 

detergent drawer.

Too much detergent is used.

•  Mix 1 tablespoonful softener and ½ l water 

and pour into the main wash compartment of 

the detergent drawer.

•  Put detergent into the machine suitable 

for the programmes and maximum 

loads indicated in the “Programme and 

consumption table”. When you use additional 

chemicals (stain removers, bleachs and etc), 

reduce the amount of detergent.

Laundry remains wet at the end 

of the programme. (*)

Excessive foam might have occurred and 

automatic foam absorption system might have 

been activated due to too much detergent usage.

•  Use recommended amount of detergent.

(*) Machine does not switch to spinning step when the laundry is not evenly distributed in the drum to prevent any damage to the 

machine and to its surrounding environment. Laundry should be rearranged and re-spun.

(**) Regular drum cleaning is not applied. Clean the drum regularly. See 4.4.2

A

CAUTION: 

If you cannot eliminate the problem although you follow the instructions in this section, consult your 

dealer or the Authorised Service Agent. Never try to repair a nonfunctional product yourself.

Summary of Contents for VOLTAS WFL6010VPWW

































Reviews: