Changing the delayed start period
If you want to change the time during countdown, you will need to cancel the
programme and set the delay time again.
Canceling the Delayed Start function
If you want to cancel the delayed start countdown and start the programme
immediately:
1. Turn the Programme Selection knob to any programme. Thus, Delayed Start function
will be canceled. The End/Cancel light flashes continuously.
2. Then, select the programme you want to run again.
3. Press Start / Pause button to start the programme.
4.
3
.10 Starting the programme
1. Press Start / Pause button to start the programme.
2. Programme follow-up light showing the startup of the programme will turn on.
4.
3
.11 Child Lock
Use Child Lock function to prevent children from tampering with the machine. Thus you
can avoid any changes in a running programme.
C
If the Programme Selection knob is rotated when the child lock is active, "Child Lock Enabled
LED" will flash 3 times. The Child Lock does not allow any change in the programmes or the
selected speed.
Even if another programme is selected with the Programme Selection knob while the Child
Lock is active, previously selected programme will continue running.
When the Child Lock is active and the machine is running, you can switch the machine to
Pause mode without deactivating the Child Lock by turning the Programme Selection knob to
On / Off position. When you turn the Programme Selection knob afterwards, the programme
will resume.
To activate the Child Lock:
Press and hold Speed and Delayed Start buttons for 3 seconds. While you are holding for
3 seconds, the "Child Lock Enabled LED" will flash. You can release the buttons when the
LEDs become permanently on.
To deactivate the Child Lock:
Press and hold Speed and Delayed Start buttons for 3 seconds while any programme is
running. While you are holding for 3 seconds, the "Child Lock Enabled LED" will flash. You
can release the buttons when the LED turns off completely.
C
In addition to the method above, to deactivate the Child Lock, switch the Programme
Selection knob to On / Off position when no programme is running, and select another
programme.
Child Lock is not deactivated after power failures or when the machine is unplugged.
Washing Machine / User’s Manual
19
/ EN
