Beko WDA 105614, User Manual

26 / EN

Washer-Dryer

Operating the product

C

NOTE

¾

Do not use liquid detergents when you activate End Time function! There is the risk of staining of the clothes.

¾

Loading door remains locked during the End Time countdown period. Machine must be switched to Pause mode by 

pressing the Start/Pause button to open the loading door. At the end of the countdown, End Time indicator turns off, 

washing cycle starts and the time of the selected programme appears on the display.

¾

When the End Time selection is completed, the time appearing on the screen consists of end time plus the duration of 

the selected programme.

5.15 Starting the programme

60

o

 C

1200

88:88

PROGRAM STARTS

1. Press 

Start / Pause

 button to start the programme.

2. The 

Start / Pause

 button which was flashing starts to illuminate steadily now, indicating that the programme has started. “Program 

started” appears on the display for "3" seconds.

3.  Loading door is locked. "Door is Closing" appears on the display when the door is being locked.

5.16 Loading door lock

DOOR IS LOCKED

There is a locking system on the loading door of the machine that prevents opening of the door in cases when the water level is unsuitable.
"Door is Locked" appears on the display when the loading door is locked.

5.17 Changing the selections after programme has started

5.17.1 Adding laundry after the programme has started:

60

o

 C

1200

88:88

DOOR OPENING

If the water level in the machine is suitable when you press Start / Pause

 button, "Door is opening" will appear on the display.

If the water

 level in the machine is not suitable when you press Start / Pause button, the display will show that the loading door is locked.

5.17.2 Switching the machine to pause mode:

60

o

 C

1200

88:88

PAUSE

Press the Start / Pause

 button to switch the machine to pause mode. The frame around the 

Start / Pause

 button starts flashing. "Pause" 

appears on the display.

5.17.3 Changing the programme selection after programme has started:

The programme change is not allowed when the current programme is running. 
If you turn the 

Programme Selection

 knob while the programme is running, "Pause to make changes" appears on the display.

You can select the new programme after switching the current programme to pause. 

C

NOTE

¾

The selected program starts anew.

5.17.4 Changing the auxiliary function, speed and temperature settings

Depending on the step the programme has reached, you can cancel or activate the auxiliary functions; see, "Auxiliary function selection". 
You can also change the speed, temperature and drying settings; see, "Spin speed selection" and "Temperature selection".