Beko WKM7306B, User Manual

8 / 10  EN

Kettle / User Manual

3.1 Preparation

1. Remove all packaging and sticker materials and 

dispose of them according to the applicable 

legal regulations.

2. Before using the appliance for the first time, 

clean all parts which come into contact with 

water carefully. (See the “Cleaning and care” 

section).

3. Completely roll out the power cord from the 

cable coil (6) on the bottom of the base (7). Pass 

the power cord through the slot on the base.

4. Clean the kettle well before initial use and 

discard water of first two boiling cycles.

3.2 Operation

1. Push the lid release button (2) on the kettle to 

open the lid (3).

– The lid (2) opens automatically.

2. Fill the water tank with water.

C

Do not place the water tank on the 

base while filling it with water.

C

Never fill the water tank above the 

maximum level indicator or below 

the minimum level indicator.

3. Close the lid (2) until it clicks into place.

4. Place the water tank on the base (6). Make 

sure that it is sitting in an upright and stable 

position.

5. Insert the plug into the wall socket.

6. Press down On/Off switch (5).

–  On/Off switch (5) illuminates and boiling 

process begins.

C

Lid (2) should always be closed 

during the boiling process; 

otherwise the kettle will not switch 

off automatically.

7. After a few minutes, the water will start to boil. 

The kettle switches off automatically and On/

Off switch (5) moves upwards.

– The function indicator goes off.

C

If you want to stop the heating 

manually, push the On/Off switch 

(5) upwards.

8. Disconnect the plug from the wall socket.

9. Take the water tank from the base (6). Only 

hold it by the handle (4).

A

WARNING: 

Do not open the lid 

(2) as hot water could splash out. 

Make sure that no water splashes 

onto the base (6).

10. Pour the water from the spout (1) to the cup 

or glass you want to use.

C

If you want to continue the boiling 

process, repeat the procedure from 

1 to 10.

C

Let the kettle cool down between 

each heating process.

Hints and Tips

•

Use softened or filtered water to prevent lime 

build-up. 

3 

Operation