background image

EN / 27

You can also change the temperature after
the washing starts. This change can be
made if the only washing steps allow it.

If you scroll to cold wash option
and press Temperature Adjustment
button again, the recommended
maximum temperature for the se-
lected programme appears on the
display. Press the Temperature Ad-
justment button again to decrease
the temperature.

6.7 Spin Speed Selection

Whenever a new programme is selected,
the recommended spin speed of the selec-
ted programme is displayed on the Spin
Speed indicator. It is possible that the re-
commended spin speed value is not the
maximum spin speed that can be selected
for the current programme.
Press the Spin Speed Adjustment button to
change the spin speed. Spin speed de-
creases gradually.
Then, depending on the model of the
product, “Rinse Hold l_l " and "No Spin _"
options appear on the display.
If you are not going to unload your laundry
immediately after the programme com-
pletes, you can use Rinse Hold function in
order to prevent them from getting wrinkled
when there is no water in the machine.
This function holds the laundry in the final
rinsing water. If you want to spin your laun-
dry after the Rinse Hold function:

1. Adjust the Spin Speed.

2. Press Start / Pause. The programme will

resume. Machine drains the water and
spins the laundry.

If you want to drain the water at the end of
the programme without spinning, use No
Spin function.

No change can be made in pro-
grammes where spin speed adjust-
ment is not allowed.

You can change the spin speed after the
washing starts if the washing steps allow it.
Changes cannot be made if the steps do
not allow it.

Rinse Hold

If you are not going to unload your clothes
immediately after the programme com-
pletes, you can use rinse hold function to
keep your laundry in the final rinsing water
in order to prevent them from getting
wrinkled when there is no water in the ma-
chine. Press Start/Pause button after this
process if you want to drain the water
without spinning your laundry. Programme
will resume and complete after draining the
water.
If you want to spin the laundry held in wa-
ter, adjust the Spin Speed and press Start/
Pause button. The programme will resume.
Water is drained, laundry is spun and the
programme is completed.

6.8 Auxiliary Function Selection

Select the desired auxiliary functions be-
fore starting the programme. Whenever a
programme is selected, icons of the auxili-
ary function symbol that is selected to-
gether with it illuminates.
Also the frames of the auxiliary functions
selected for the current programme after
the washing has started remain illumin-
ated.

Summary of Contents for WM710













































Reviews: