background image

EN / 31

Additional laundry can be added
into the machine during the End
Time countdown. At the end of the
countdown, End Time indicator
turns off, washing cycle starts and
the time of the selected pro-
gramme appears on the display.

6.10 Starting the Programme

1. Press Start / Pause button to start the

programme.

2. Loading door is locked. The door lock

symbol appears on the display after the
loading door is locked.

3. Programme follow-up indicator lights on

the display will show the current pro-
gramme step.

If no programme is started or no
button is pressed within 10 minutes
during programme selection pro-
cess, the product will automatically
turn off. Display and all indicators
turn off.
If you press On / Off button, the de-
fault selected programme informa-
tion is displayed.

6.11 Loading Door Lock

There is a locking system on the loading
door of the machine that prevents opening
of the loading door in cases when the water
level is unsuitable.
"Door Locked" symbol appears on the dis-
play when the loading door is locked.

If the Remote Control Function is
selected, the door will be locked. In
order to open the door you must de-
activate Remote Start Function by
either pressing the Remote Start
button or changing the programme
position.

Opening the loading door in case of
power failure:

In case of power failure, you can
use the loading door emergency
handle under the pump filter cap to
open the loading door manually.

To avoid any water overflow before
opening the loading door, make
sure there is no water left inside the
machine.

1. Turn off and unplug the appliance.

2. Open the pump filter lid.

3. Pull down the loading door emergency

handle with a tool and release. Then
open the loading door.

4. If the loading door does not open then

repeat the previous step.

Summary of Contents for WM710













































Reviews: